Home Entertainment & Automation Services in Matthews, NC.
Home Entertainment & Automation Services in Matthews, NC.
Home audio and Video Services in Matthews, NC.  TV installation, Surround Sound, Home Entertainment Systems
Comparing DLP, Plasma, Projection 3D Systems

Comparing 3D DLP, PLasma, LCD and ProjectionWe compare pros and cons of projector, DLP, and flat-panel 3D setups.

3D comes in many shapes and flavors. You can buy a flat-panel TV with the capability, or go for the larger screen sizes of a DLP TV. The other option is a video projector.

All have their merits as you’ll read about in the following profiles. After reading them, you should have a better idea of which 3D formula will work best in your home.

Of course, no TV is worth a grain of salt without speakers and source equipment, so we’ve included a list of components used in each profiled 3D setup. This, combined with each homeowner’s impressions about 3D viewing, will help you put together your own 3D entertainment system.

We fix $99 TV installs!  Call C.I.S. today for your free in-home consultation

The Entire System: URC MX-980 remote; Peachtree Nova preamplifier/DAC; Samsung 58-inch PN58C7000 kit (Blu-ray player, two pairs of glasses and Monsters vs. Aliens); Totem Acoustic Forest freestanding speakers; Integra Research RDA-7.1 amplifier

Plasma: Space-Saving 3D

For three years Gabe Montemurro and his wife, Elizabeth, had been using a Sony SXRD rear-projection TV – quite happily. But the thought of being able to view content in 3D was too compelling for these early adopters to ignore. Plus, since the Montemurros’ baby was now walking, they thought it would be best to buy a slimmer flat-panel display that could be pushed inside their entertainment cabinet and beyond the toddler’s reach.

Gabe had a few other prerequisites for a new display besides being flat: it had to be on the higher end of the performance scale, it had to be plasma and it had to be somewhat affordable. Samsung‘s high-def PN58C7000 TV fit the bill, coming in at under $3,000. As a bonus, the 58-incher came packaged with a 3D Blu-ray player, two pairs of 3D glasses and a 3D Blu-ray disc of Monsters vs. Aliens.

After a few viewings of the movie, the Montemurros were hooked. “3D is much more immersive than 2D,” says Gabe. “You find yourself leaning forward, sitting on the edge of your seat.” Unfortunately, there are only so many times you can watch the same movie. “Monsters vs. Aliens is the only true 3D source we own, and when we purchased the system in March there simply wasn’t much content available,” Gabe laments.Custom Installation Services - We can fix your $99 TV install!

Even with the lack of 3D programming, the family still gets to experience bits and pieces of 3D just by pressing the 3D button on the TV remote control. The PN58C7000 features proprietary 2D-to-3D conversion technology, which when activated renders 2D images to near 3D quality. “If it wasn’t for the conversion technology, 3D for us would be extremely disappointing,” says Gabe.

The best way to describe the conversion, says Gabe, is faux 3D. “It’s really hit or miss. Some things you watch, you say, ‘Wow, that really added some depth.’ Other things fall completely flat.” The Montemurros have experimented with all sorts of programming and content: movies, sports, digital pictures and PlayStation 3 video games. “I watched a recording of the Super Bowl, and there were some camera angles where the action appeared 3D. The same with hockey. The 3D conversion added nothing to an animated show like The Simpsons, but gave the sense of actually riding in a car during a NASCAR PS3 game.”

They were most impressed, however, with how their collection of digital pictures looked when displayed in 3D. “Suddenly, there was so much depth and dimensionality, so much so that I went through my favorites and created a special 3D playlist,” Gabe says.

So what about the kooky glasses that came with their 3D package? “I’d rather not have to wear them,” says Gabe, “but hey, it’s worth it to experience a new technology like this.”

Call C.I.S. for your 3D TV questions - We also fix our competition's $99 TV install!

The Entire System: Mitsubishi 3D starter pack; Definitive Technology speakers; Control4 TSM10GB touchpanel; Integra DTR 7.9 receiver; Sony BDP-S570 Blu-ray player; Mitsubishi 73-inch WD-73837

DLP: 3D Trade-up

As a longtime fan of Mitsubishi products, Mark Capriola is benefiting from the manufacturer’s commitment to the new viewing technology. The audio and video enthusiast recently traded in his 65-inch WD-65833 Diamond DLP TV for a 73-inch WD-73837 Diamond DLP unit. In the process, he got a full 3D upgrade, “something he loved the idea of,” says custom electronics professional Dirk Dutton of Primetime Audio Video in Rockford, Ill. 

The fact that the new screen was much larger than the biggest 3D flat panel available, yet cost significantly less, was one more plus. Primetime sold the set to Mark for $2,400 (plus $399 for a starter kit, which includes two sets of glasses and an HDMI adapter); a 63-inch 3D Samsung flat panel, which Primetime also sells, would have cost closer to $3,000, says Dutton.

“You can’t really beat a DLP in terms of price and screen size.”

Although his loyalty to Mitsubishi had a lot to do with his choice, Capriola says he was willing to give flat-panel options a fair shake. “I visited the Primetime showroom before I bought anything to compare five or six different displays. The DLP TV had the horsepower I was looking for.”

Aside from making room for the larger set, there was little Primetime had to do to Capriola’s living room to make it suitable for the new display and its 3D presentation capabilities. Even the audio was good to go, thanks to their existing 5.1 surround-sound setup of an Integra receiver and Definitive Technology speakers.

“All we really had to do was program it into the home’s existing Control4 home automation system,” says Dutton. This tie-in allows the DLP to display menus for operating the home’s audio/video equipment, lights and other systems. Primetime also created a special 3D button that switches the DLP from 2D mode to 3D. Capriola navigates to the command by using his iPad or a handheld remote.

That same command kick-starts a Sony Blu-ray player, another recent addition to the entertainment system. Previously, Capriola was using a PS3 to play Blu-ray movies – a good choice, “but the Sony player is able to load movies a lot faster, and we didn’t really want to wait for the PS3 3D update,” says Dutton.

The combination of the 3D button and the Sony Blu-ray player makes the transition between 2D and 3D seamless, and eventually so will the sources in Capriola’s well-stocked equipment rack in the basement. Wired to the TV through a Control4 video distribution processor are a Vudu BX100 set-top box, Dish Network VIP922 satellite receiver and Sony BDP-CX7000ES Blu-ray player, among other components. Some of these content providers have already started to offer 3D programming – with much more to come – so Capriola’s assortment of 3D choices is bound to keep growing.

Did your $99 TV install not go as planned?  Call C.I.S, we specialize in fixing the $99 TV install!

The Entire System: Crestron TPMC-8X; Monitor Audio Platinum 300 speakers and GSW-12 subwoofer; Digital Projection 3D Titan; Stewart Filmscreen Luxus ElectriScreen StudioTek; Marantz AV8003 receiver; Mechdyne Dimension server

Projection: Private 3D Demo

The owner of this high-end theater had only a standard video projector installed when 3D started to get hot. Unsure of whether he should trade in his recently purchased projector for a 3D model, he agreed to let the company that designed his theater demonstrate a unit in his home first. “We told him we’d give him a deal on the installation of the new projector if he’d host an open house for builders and clients in the area,” says Shawn Hansson of Logic Integration in Denver.

The Logic Integration installers temporarily staged the Digital Projection International (DPI) 3D Titan projector on a table, leaving the existing DPI 1080p Titan projector mounted to the ceiling. Also left for the demo was the 130-inch Stewart Filmscreen – a perfect size for 3D viewing, according to the homeowner.

As part of its $130,000 3D package, DPI includes a Dimension server from Mechdyne with the Titan projector. The server comes preloaded with a variety of 3D material, and it left a lasting impression on the homeowner.

“We watched everything from cartoons and advertisements to video games and movies, and it all was so much more immersive than the 2D content I typically watch. The difference is almost comparable to black-and-white television to color.”

What made the biggest impact, says the homeowner, were the active shutter glasses that came with the system. “I’ve used polarized glasses before, and it just doesn’t compare to the 3D quality you get from active shutter glasses. You’re able to see the full 1080p image.”

The gathering was a huge hit, especially for the homeowner, who was able to experience 3D from a $130,000 projector in the comfort of his own home. Was it enough to convince him to upgrade? “Not yet,” he says. “The cost is still too high and there’s not enough content available.” But when things change, “I’ll be seriously looking at a new projector.”

by Lisa Montgomery

http://www.explore3dtv.com/article/14956/Comparing-DLP-Plasma-Projection-3D-Systems/?textpage=1

Custom Installation Services, LLC – We specialize in fixing the $99 TV install by our “competitors”!

Posted in 3d movies, 3D TV, APC, Audio Systems, Automation, Blu-ray, Flat Panel TV's, Home Theater, i-Pad, LED, Media Rooms, Multi Room A/V, Music and Movies, News, technology, Theater Seating | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment


Do iPads Belong in a Wall?

i-Pad Integration - Charlotte, NC

Call Custom Installation Services To Discuss How You Can Integrate Your i-Pad Into Your Home

It may be irrational, but even the wealthiest homeowner may find it wasteful and just plain wrong to mount an iPad semi-permanently behind a wall.

Where does an iPad belong? On a countertop? Coffee table? The couch? Your lap?

Or should it be Velcroed to your dashboard, mounted on the wall like a monitor, moved from wall station to wall station via plastic tabs or snap-on discs, or mounted permanently behind a bezel?

Custom electronics pros are debating this very topic on dealer-oriented forums, and the opinions are mixed.

In our world, the iPad is so cheap compared with most traditional automation touchpanels that you may as well buy several of them and lock them into the walls like those old-fangled touchpanels we used to sell for $3,000 apiece.

But our world has changed!

Homeowners may no longer say, “I want a home control system, and I would like to be able to use it with an iPhone and iPad.”

Instead, they say, “I love my iPad. Design a home control system around it.”

By that time, they’re already used to toting their iPads around the house, from room to room as needed. Maybe they have a few scattered around the place. Mobility is one thing they really love about this lightweight, skinny screen.

So won’t they balk at the idea of forever locking an iPad into the wall? It may be irrational, but even the wealthiest homeowner may find the idea wasteful and just plain wrong.

Bethesda Systems in Maryland has a nice blog post beseeching clients to do the unthinkable: tether their iPads.

iPad was designed to be held in your lap. And it’s proven itself to be a truly revolutionary mobile device. And now we’d like you to consider…letting go. Literally.

He shows some nice examples of iPads embedded in clever cases such as an old Mac classic, and in convenient places like a kitchen cabinet.

At the end of the blog, Bethesda shows an iPad with shattered glass, warning:

Don’t let this happen to you! With your in-wall mounted iPad it’s always safe, it’s always charged, and it’s always right where you left it.

Clearly, the right solution for homeowners who can afford it is to have multiple iPads mounted in convenient places around the house.

What do you think?

 by Julie Jacobson

http://www.electronichouse.com/article/do_ipads_belong_in_a_wall/apple

Custom Installation Services, LLC – ”We may be a few dollars more than the competition, but we are a million times better”.

Posted in Audio Systems, Automation, i-Pad, Multi Room A/V, Music and Movies, News, technology | Tagged , , , , , , , , , , , , , , , , , , , , | Leave a comment


Why Energy Efficiency Starts at Home

C.I.S. is the Carolina's #1 Authorized Retailer/Installer of Lutron & HAI Energy Saving Devices

C.I.S. is the Carolina's #1 Authorized Retailer/Installer of Lutron & HAI Energy Saving Devices

It’s time we took energy efficiency personally.

Consider the following stats:

-Over 70 percent of U.S. electricity is generated by burning coal, petroleum, or natural gas, all fossil fuels that emit carbon into the atmosphere when burned. Coal alone provides 44 percent of U.S. electricity and the majority of greenhouse gases. Source: DOE

-Homes and commercial buildings use 72 percent of U.S. electricity, and homes use 51 percent of that. Source: EPA

-There are approximately 126 million homes in the United States, which equates to an annual emission from homes alone at approximately 1.3 billion metric tons of carbon. Source: US Census Bureau 2006

-According to the National Home Energy Efficiency Program (NHEEP), the U.S. housing stock wastes more energy than any other sector in the world.

So why are environmentalists, policy makers and others focused on reducing the energy output of industry, transportation and the commercial sector? It’s true that we can make huge gains by making our power and manufacturing plants, cars and commercial buildings much more efficient. But many of us forget to include our homes in the energy efficiency equation. And this, I am convinced, is the primary reason why we are not seeing the efficiency gains we’d like in these other sectors.

A recent New York Times article, “Doing More While Using Less Power,” throws around a bunch of conflicting energy efficiency projections. And other articles on the subject typically state projections in the billions and trillions—collective numbers that few can comprehend, not to mention the fact that wildly varied projections stretch into 2020 or 2030 or 2050—times few us can comprehend, especially when most of us are trying to survive in an economically scary 2010.

The Times article also laments the fact that some businesses, while they could save millions on energy efficiency initiatives, remain hesitant to do so. “Perhaps the biggest barrier to maximizing energy efficiency is the natural reluctance of people to try something new,” the article opines.

That may well be true. In both business and politics, anything new poses risk, and risk is not typically welcome in economically troubled times.

But maybe, just maybe, the hesitation people have with all this energy efficiency stuff is that they are not personally invested in it. And of course they are—if we continue on our wasteful ways we will all have stakes in inflated energy costs and a deteriorating climate. But people don’t feel they are invested in it—and that is the problem.

The sad part is, people have reason not to be personally invested in energy efficiency: We throw incomprehensible numbers at them—billions and trillions—as well as incomprehensible terms like BTUs and kilowatt hours—and dates that extend far into the future, which more likely inhibits a sense of urgency in the matter. We say we should set policy in industry and in the commercial sector and in transportation—and soon the entire matter is in someone else’s hands—not our own. The problem becomes so much larger than each individual. Instead, we need to personalize energy efficiency and give everyone a stake in it.

The numbers above prove we should start our energy efficiency efforts in the home. So why aren’t we doing it?

The Real Prius Effect

Say what you will about the Toyota Prius—I say you can do the planet better by turning lights off in your home—but the hybrid electric car does one thing amazingly well: It puts energy efficiency in the face of its driver, with a large screen-based readout that makes saving gasoline like a video game. The Prius may not be the best choice for saving the planet, but it manages to personalize energy efficiency and gives its users a real stake in it.

And here’s another story, which for many actual people may be far more convincing than a bunch of incomprehensible numbers. I was at a Little League game this summer, the day an energy-efficiency appliance rebate program ran in my state, and the very blue-collar, probably not so energy-efficient granddad in front of me said, “Yeah, we bought a new washing machine and a new refrigerator—and you know what? It’s going to use half as much electricity as the one we had!” He was as excited about the energy efficiency as he was about his rebate—if not more so. And the funny thing was, the scene repeated itself the very next week with another person who suddenly started thinking about energy efficiency. That is personalizing it. And that is why our energy efficiency efforts should start in the home—with real people and not vague corporate or government entities. Involve real people in energy efficiency, and we will start to get real results.

by Steven Castle

http://www.electronichouse.com/article/why_energy_efficiency_starts_at_home/

Custom Installation Services, LLC – ”We may be a few dollars more than the competition, but we are a million times better”.

Posted in Automation, HAI, lighting control, Lutron Radio Ra II, News, Structured Wiring, technology | Tagged , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment


Custom Installation Services, LLC | P.O. Box 132 Matthews, NC 28106 | 704-400-8701 | dmiller@cis-nc.com
Visit Our Partners: DV Wise Custom Homes | CleanX Corp

 


 

 

 

 

Website Hosting and Website Design by McBryde Web Site Design
For technical issues e-mail webmaster@mcbryde.com