Home Entertainment & Automation Services in Matthews, NC.
Home Entertainment & Automation Services in Matthews, NC.
Home audio and Video Services in Matthews, NC.  TV installation, Surround Sound, Home Entertainment Systems
Philips Pronto: What Went Wrong?

Custom Installation Services is Charlotte's source for URC remote controls and programming

CIS is the Charlotte area's #1 retailer fo Universal Remote Control products! Call us today for a free evaluation

Integrators and other business partners say the iPod/iPad wasn’t to blame for the demise of Philips Pronto; why didn’t Philips try harder to find a buyer?

How hard did Philips try to sell its Pronto remote-control division?

Some of the major vendors in the CE pro channel never heard from the company, which announced last week it was closing its Pronto business unit.

When contacted by CE Pro, many of the obvious acquisition partners said Philips never approached them about buying the Pronto operation or its intellectual property. Why is that?

The closure of the Pronto division strands thousands of CE pros – including integrators and manufacturers – who invested in product training and software development, not to mention inventory.

While these customers need not be the concern of Philips, which must answer to shareholders, their commitment to the Pronto line suggests that a buyer could be found if Philips tried a little harder. Indeed, some potential buyers are scrambling now to inquire about the Pronto IP.

Replying by email to several questions posed by CE Pro, Philips had virtually nothing to say about the demise of Pronto, except that it was (understandably) too niche of a line for the Philips Consumer Lifestyle portfolio.

Is the IP still available for sale?

“There is no news right now on how Philips will use its IP and trademarks related to the Pronto business.”

Was the iPad/iPod to blame? Were Pronto price increases to blame?

“No, this was a strategic decision made by Philips. Philips derives its primary strategic strength from a broad and globally divided distribution network for its consumer products. We see very few opportunities for growth for Pronto in the future portfolio of Consumer Lifestyle products. Philips must make choices regarding which strategic markets it will invest in, and the niche market for Pronto products is not one of these.”

And so on.

So What Happened to Pronto?

Since Philips isn’t talking, we are left to our own speculation about why Philips closed Pronto and why a buyer wasn’t found.

The obvious question is: Did the iPod/ iPad kill Pronto?

Probably not, according to industry insiders interviewed by CE Pro.

More likely, Philips Pronto became too expensive, versus similar products from Remote Technologies Inc. (RTI), URC, Universal Electronics Inc. (UEI Nevo) and even Control4.

Philips is based in the Netherlands. Most of the Pronto business, including manufacturing, takes place in Belgium. Philips tried to shift Pronto manufacturing to Asia, but the company continued to build product more expensively in Europe. There is some speculation that agreements within the European Union hindered Philips’ ability to build Pronto products overseas.

Last year, Philips raised wholesale prices across the Pronto product line by as much as $200.

“I think Pronto couldn’t compete in the marketplace anymore,” says Richard Scholl, CEO of Worthington Distribution, a large Pronto distributor serving the custom integration market.

Scholl says Pronto business dropped substantially last year after the price increase, and not because of competition from the iPod or iPad.

Had Pronto kept prices down, in line with its competitors, it would have made a “major difference,” Scholl says.

According to Scholl, distributors have the opportunity to buy Pronto inventory until November 29, 2010, after which Philips will no longer accept orders.

Philips says it will continue to “fulfill its warranty obligations.”

It still leaves us wondering: Why didn’t Philips reach out to the usual suspects before shutting its doors?

By Julie Jacobson

Custom Installation Services, LLC – We specialize in fixing the $99 TV install by our “competitors”!

Posted in 3D TV, Automation, Home Theater, IP Cameras, LED, lighting control, recycling, technology | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment


Lutron Plans Whole-House Energy Control

Custom Installation Services is Charlotte's Source For Lutron RadioRa!

Call C.I.S. To Discuss The New Lutron RadioRa2 Product Line And How It Can Benefit Your Lifestyle

Energy-saving daylight sensing added to Lutron lighting and shading control.

Lutron Electronics has announced product rollouts that will take place this year and next, designed to provide total home control and energy management, mainly via its new upscale HomeWorks QS wired and wireless lighting systems and its mid-market RadioRA 2 wireless lighting solutions.

“We’re really going to focus on control of energy in the home,” says David Weinstein, Lutron’s vice president of sales.

For the first time, HomeWorks QS and RadioRA 2 will feature daylight sensing to automatically adjust lights and shades, based on the amount of sunlight penetrating a space. Occupancy sensing, which Lutron says can save 20 percent or more in lighting energy by automatically shutting off lights when no one is in a room, is also a part of the systems.

Lutron has used daylight sensing in its commercial products, but for the first time is introducing the technology into its residential lines.

Most automated shading in homes is accomplished by programming astronomical clocks to descend shades at certain times of the day to help keep a room cool—or do the opposite to help heat a room.

Lutron’s daylight sensing solution could also enable daylight harvesting—using the natural light to illuminate a room and reduce the need for electrical lighting.

Up to now, electronics installers had to use third-party sensors, and the programming required could be complex, explains Lutron product development manager Richard Black. Installers often used contact closures that descended or raised the shades at certain daylight thresholds. That was a simple solution to a complex issue, so when clouds passed, for example, motorized shades could go up and down too frequently. “There are a lot of settings you have to have to make that work effectively. Now that we have the logic, we can make it work better.”

Lutron also announced Venetian blinds with intelligent tilt alignment, as part of its Avant line. Lutron says the product can tilt the blinds seamlessly, and the company will look to integrate automated tilting via daylight sensing as well. The system can also adjust height of shading as the angle of the sun changes.

Chief among Lutron’s other product announcements are:

-A plug-in appliance module coming in December 2010 to monitor and control appliances are other energy loads in a home.

-Dynamic keypad coming in April 2011 that controls lights, shades, HVAC, audio/video and energy from one spot.

-Venetian wood blinds with intelligent tilt alignment.

-seeTemp intelligent thermostats coming in April 2011.

-An Eco Button that can dim lights and set back the thermostat plus or minus 2 degrees to save energy.

-Integration with iPad and iPhone.

-A phase-adaptive dimmer that automatically senses the load—whether its CFL or LED, for instance—and adjusts the dimming for that.

-A Green Button coming in April 2011 that dim lights, lower shades, sets back temperature, and turns off unneeded appliances via plug-in appliance modules.

-An iPad app in Dec. 2010.

“By adding cooling and heating, in addition to lighting and shading and connected loads, we can control 60 percent of the energy use in the home,” says Weinstein.

by Steven Castle

http://www.electronichouse.com/article/lutron_plans_whole-house_energy_control/

Custom Installation Services, LLC – ”We may be a few dollars more than the competition, but we are a million times better”.

Posted in Automation, HAI, i-Pad, IP Cameras, lighting control, Lutron Radio Ra II, Structured Wiring, technology | Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment


Do iPads Belong in a Wall?

i-Pad Integration - Charlotte, NC

Call Custom Installation Services To Discuss How You Can Integrate Your i-Pad Into Your Home

It may be irrational, but even the wealthiest homeowner may find it wasteful and just plain wrong to mount an iPad semi-permanently behind a wall.

Where does an iPad belong? On a countertop? Coffee table? The couch? Your lap?

Or should it be Velcroed to your dashboard, mounted on the wall like a monitor, moved from wall station to wall station via plastic tabs or snap-on discs, or mounted permanently behind a bezel?

Custom electronics pros are debating this very topic on dealer-oriented forums, and the opinions are mixed.

In our world, the iPad is so cheap compared with most traditional automation touchpanels that you may as well buy several of them and lock them into the walls like those old-fangled touchpanels we used to sell for $3,000 apiece.

But our world has changed!

Homeowners may no longer say, “I want a home control system, and I would like to be able to use it with an iPhone and iPad.”

Instead, they say, “I love my iPad. Design a home control system around it.”

By that time, they’re already used to toting their iPads around the house, from room to room as needed. Maybe they have a few scattered around the place. Mobility is one thing they really love about this lightweight, skinny screen.

So won’t they balk at the idea of forever locking an iPad into the wall? It may be irrational, but even the wealthiest homeowner may find the idea wasteful and just plain wrong.

Bethesda Systems in Maryland has a nice blog post beseeching clients to do the unthinkable: tether their iPads.

iPad was designed to be held in your lap. And it’s proven itself to be a truly revolutionary mobile device. And now we’d like you to consider…letting go. Literally.

He shows some nice examples of iPads embedded in clever cases such as an old Mac classic, and in convenient places like a kitchen cabinet.

At the end of the blog, Bethesda shows an iPad with shattered glass, warning:

Don’t let this happen to you! With your in-wall mounted iPad it’s always safe, it’s always charged, and it’s always right where you left it.

Clearly, the right solution for homeowners who can afford it is to have multiple iPads mounted in convenient places around the house.

What do you think?

 by Julie Jacobson

http://www.electronichouse.com/article/do_ipads_belong_in_a_wall/apple

Custom Installation Services, LLC – ”We may be a few dollars more than the competition, but we are a million times better”.

Posted in Audio Systems, Automation, i-Pad, Multi Room A/V, Music and Movies, News, technology | Tagged , , , , , , , , , , , , , , , , , , , , | Leave a comment


Custom Installation Services, LLC | P.O. Box 132 Matthews, NC 28106 | 704-400-8701 | dmiller@cis-nc.com
Visit Our Partners: DV Wise Custom Homes | CleanX Corp

 


 

 

 

 

Website Hosting and Website Design by McBryde Web Site Design
For technical issues e-mail webmaster@mcbryde.com